The construction of the stage plays a very important role in the activity performance. The stage construction should not only be beautiful, but also be solid and stable. The stage electric hoist plays a very important role in the stage construction process, which is used for stage truss assembly, stage lighting lifting, etc., to speed up the stage construction work.
Construction steps of activity stage:
1. Put the two legs of the stage on the approximate position on the ground;
2. Insert the diagonal pull rod on both sides into the pin on the upper leg and fasten the check valve;
3. Then buckle the stage frame into the U-slot above the leg, and then the first group of stage is assembled;
4. Put one leg side by side;
5. Then select two sets of diagonal pull rods to connect with the original leg, and the leg will be fixed;
6. Then lay the table frame. The two frames share one leg in the middle, and the two frames are placed in the U slot;
7. It can be infinitely extended by analogy;
8. The next column is assembled closely in the same way;
9. Insert the diagonal pull rods on both sides into the pins above the legs and fasten the check valves;
10. The stage frame should also be buckled into the U-slot above the leg, and then the second group of stage will be assembled;
11. Put an outrigger side by side;
12. Then use two sets of diagonal pull rods to connect with the original outrigger, and the outrigger will be fixed;
13； Finally, it is necessary to lay the table frame. On the middle leg shared by the two table frames, put the two table frames in the U slot.
